Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

In this study, the anti-penetration performance of polyurea/ASTM1405-steel composite plate subjected to high velocity projectile was analyzed. Two kinds of modified polyurea material (AMMT-053 and AMMT-055) were selected and a ballistic impact testing system including speed measuring target system and high-speed camera was designed. This experiment was conducted with a rifle and 5.8 mm projectile to explore the effects by the polyurea coating thickness, the polyurea coating position and the glass-fiber cloth on the anti-penetration performance of polyurea/ASTM1405-steel composite plate. The result showed that the effects of polyurea coating position were different between two types of polyurea, and that the effects of glass-fiber position were disparate between two types of polyurea as well. For AMMT-053 polyurea material, it was better to be on front face than on rear face; whereas for AMMT-055 pol-yurea, it was better to be on rear surface although the difference was very subtle. Additionally, formulas had been given to describe the relationship between the effectiveness of polyurea and the thickness of polyurea coating. In general, AMMT-055 had better anti-penetration performance than AMMT-053. Furthermore, five typical damage modes including self-healing, crack, local bulge, spallation and local fragmentation were defined and the failure mechanism was analyzed with the results of SHPB test. Additionally, the bonding strength played an important role in the anti-penetration performance of polyurea/steel composite plate.     

亚超结合反舰导弹控制规律的选择与分析

针对现代海战的特点,分析了现代海战对反舰导弹的性能需求,提出了亚超结合反舰导弹是未来反舰导弹的发展方向。进一步分析了亚超结合反舰导弹对控制系统的要求,并对未来亚超结合反舰导弹控制系统控制规律的选取作了研究分析,最后提出了亚超结合反舰导弹设计的主要关键技术和应注意的几个问题。     

对地预标定射击原理

以往的对地射击原理一般只针对固定目标、粗略地修正风引起的误差,瞄准精度不高。有鉴于此,目前出现了一种新的对地射击原理,通过用瞄准标志先后两次与运动目标重合,完成目标预标定和瞄准,引入目标的综合速度修正,从而提高了瞄准精度。建立了数学模型,推导出了原理公式,并给出了仿真实例,最后分析了此原理的特点。     

层次分析法在反坦克导弹阵地选择中的应用

反坦克导弹是未来高技术战争中不可或缺的反装甲兵种,特别是在渡海登岛作战中,先头抢滩登陆部队能否巩固和扩大登陆场地,很大程度取决于登陆部队反装甲力量的运用.在此过程中,反坦克导弹分队的阵地选择极其重要,运用层次分析法建立反坦克导弹阵地选择的递阶层次模型,通过计算,确定反坦克导弹阵地选择的最佳方案通过组合一致性检验,选择地形单元C_1为反坦克导弹阵地,作为最终的决策依据.     

多业务接入平台及其在军事通信中的应用

文中介绍了军用通信网接入层的组建原则,通过比较目前几种不同的接入技术,说明了多业务接入平台(MSAP)的技术特点和优势,提出了以MSAP作为军用通信网接入层的解决方案,并给出了采用MSAP组网的网络示意图。最后采用CPU+ASIC+FPGA这种典型的通信系统硬件架构,分析了MSAP的软硬件联合实现。     

新型光电装备免费及按比例组合保修策略

通过对新型光电装备故障规律和实际保修的需求分析,在原有规定保证期内免费保修策略基础上进行优化,提出免费及按比例保修组合策略概念,建立该策略对应的费用模型及可用度模型,得到费效比函数。同时通过对某新型光电装备保证期内维修保障工作应用组合保修策略开展实例建模,得到最优策略并分析证明提出该组合策略的实用性和可行性。     

水源热泵机组的节能效果及环境影响分析

水源热泵机组由于具有较好的节能优势及环境效益，在国内外取得了较快的发展。但对于水源热泵机组全生命周期的环境影响定量化研究得较少。介绍了冷热源机组环境影响评价较为成功的等价温室效果评价方法，对评价过程所涉及的因素进行了分析说明，并应用该评价方法对重庆市某工程拟采用的3种冷热源方案进行了机组环境影响分析。结果表明采用水源热泵机组作为冷热源无论在夏季还是冬季不仅存在巨大的节能优势，最高节能量达到32．05％，而且在全生命周期内的温室气体CO2的排放量也较少，仅为方案2的67．40％，方案3的89．06％，具有良好的环境优势。     

便携式自寻的反坦克导弹攻顶弹道研究

便携式反坦克导弹在通过击顶方式打击目标时,要同时满足落角和精度的要求,以达到对目标的毁伤效能。首先推导带落角约束的最优比例导引律;然后设计携式反坦克导弹击顶弹道方案,导弹先出筒无控,以指数规律完成爬升,采用定攻角进行滑翔飞行,弹道末端运用推导的导引律来满足对落点和落角的约束。仿真结果表明,当反坦克导弹攻击不同距离的目标时,该弹道方案具有较强的有效性。     

In pursuit of accountability during and after war

ABSTRACT

This article aims to identify and elaborate the causes and ramifications of applying transitional justice, in particular accountability measures, to situations of war. It focuses on the correlations between peace and justice – and hence an important perspective on the question ‘how do wars end’. The article seeks to understand some of the main challenges associated with pursuing accountability for crimes committed in contemporary forms of conflict, including civil wars and abuses committed by major powers in armed conflict.     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004